Production of pipes with an inner diameter of one-half inch to 6 inches with a thickness of 2 mm to 4 mm from a length of 6 m to 12 m in a continuous process including forming, high frequency induction welding, sizing, cutting and packing and applying non-destructive and destructive tests ( According to the needs of the buyer). Hot steel sheets enter the factory in rolls and enter the production lines after passing through the cutting section.
The two cut steel heads are joined together by the horizontal and vertical rollers of the forming machine in several stages, and in the welding stage, their edges are welded together by high-frequency induction welding. After that, the pipe enters the sizing part by passing several rollers and leaving the heads and turning into the desired product, in the cutting part, it is cut to the specified dimensions and, if necessary, after performing the required tests, it is packed and prepared for delivery.
Executive instructions in pipe and profile factories of Pasargad Saba Steel Industrial Group are compiled and implemented based on technical points and requirements set in valid international standards and domestic standards in the field of technical specifications of raw materials and process of manufacturing pipes and profiles and technical specifications of factory production lines.